Gray & Colored Concrete Floors
How to:
Seal | Clean | Repair | Protect
Strip & Restore | Easy Care
Phone Viewing Tips:
Turning it sideways can improve viewingPage bounce? Reload it. Different browsers can handle pages differently.
Dense, tough paving | indoors or outdoors | Easily formed to random outlines and shapes | Colors can be deep and rich depending on sealer | Many choices for finishing gloss - from none to high gloss
As you progress down this page you will see:
- The products you may need for surface Preparation before sealing.
- Pictures of each of the recommended sealers for this surface type. Click the sealer's picture for it's full description.
- Handy tips to prevent issues that others have had before coming to Aldon.
- Perhaps more information than you need now, but might be of interest later.
Surface Preparation before sealing
What you need for your Colored Concrete project
You have 1 of the 2 possible situations that follow. The products you need are listed in the sequence that you would use them. Click the picture to add a product to your list.
#1. If the new Colored Concrete is not fully clean
| Use 1st | 2nd | 3rd |
|---|---|---|
|
n/a
|
 *Grout Residue Remover |
 **Efflorescence Treatment |
** Remove efflorescence powder prior to sealing
#2. If the Colored Concrete Concrete has had a sealer applied in the past.
| Use 1st | 2nd | ||
|---|---|---|---|
 Premium Stripper |
*Grout Residue Remover |
 **Grout Restoration |
** If your concrete is badly stained. Regular stains are usually removed by the stripping process.
Your Choices for Sealing
A water drop should darken underneath. If this does not happen on your concrete it needs to be treated differently. It might have been sealed at some time and you should review this page.
Add to Project List
|
|---|
You can add one application of "Lifeguard" for a matte level gloss. You can increase gloss with more applications as desired.
"Crystal Glaze Sealer" on Colored Concrete - This sealer is | Water Based | Coating Type. Provides: little or no color enhancement and high gloss. Coverage guidelines (depending on absorption) 350 to 600 sq.ft./gal.
Add to Project List
|
|---|
You can add one application of "Lifeguard" for gloss protection from traffic wear.
"S-B-S Sealer" on Colored Concrete Concrete. This sealer is | Solvent Base | Penetrating Type. Provides: color enhancement | low gloss | strengthening | efflorescence barrier. Coverage guidelines (depending on absorption) 150 to 500 sq.ft./gal.
Add to Project List
|
|---|
You can add one application of "Lifeguard" for gloss protection from traffic wear and add a matte level gloss. You can increase gloss with more applications as desired.
Easy Care Products: for a Colored Concrete Concrete floor.
_____________________
Sample n/a |
_____________________
Sample n/a |
|---|
"Maintain" - for no streak wet mopping of Colored Concrete Concrete and all other types of flooring.
_____________________
|
_____________________
Sample n/a |
|---|
"Dust Whiz" - easy dry mop dust pickup at 1,000 sq. ft. in 3 minutes.
Items of Interest
How to select a sealer
An Aldon sealer does far more than just bead water and look pretty! To see what that is click here.
Your results may vary somewhat from these pictures due to variations in computer display and the surface materials themselves. Nevertheless, you will be able to see the differences well enough to make good choices.
Important: If your project has had any sealer applied in the past, it must be evaluated differently. To see why, Click here!
Sealer "solids" levels?
Here are the relative solids level of our petroleum solvent based sealers:
Lowest: SBS Sealer
Next level Higher: Penetrating Paver Sealer
Another level higher: Porous Stone Sealer
Highest level: Mexiglaze
A porous surface will require more gallons (more money) of a lower solids sealer than using a higher solids level sealer. That, plus different surfaces have different requirements, is why we make the different solids levels. They all work as described, so it is only a matter of which is best for your needs.
The more porous the surface, the more solids will be required to achieve the desired effects of gloss, strengthening, stopping efflorescence, etc.
The more porous the surface, generally the greater the need for the sealer to create a stronger surface.
An old sealer below the surface, even after stripping, will lower the absorption and porosity to some degree. Sometimes it is uneven below the surface and can create an uneven coloring effect with a color enhancing sealer applied later. Another reason to test first.
To see more of why the price per gallon has little to do with what will be your total project cost, click here. For other questions about sealers, see the FAQ Sealers link on the slide out menu.
Do not believe yet that you have the type of surfacing you were told:
Do not "pre-seal" - apply a sealer BEFORE grouting.
Colors fading?
You can stop efflorescence (white powdery stains)
Efflorescence (subsurface originating white powdery stains) is common with many surfaces. This can even occur before installation. However, it is easily made to disappear without scrubbing by using Aldon Efflorescence Treatment. If the white powder is old and is now "crystalline" that is bonded to the surface - it can be eaten away with Aldon Grout Residue Remover.
Renew a glossy finish
Aldon Sealer applications can be made hours or years later, but do not apply thin layer upon thin layer. Apply a sufficient quantity to insure below surface penetration & bonding. Or, for the solvent based penetrating sealers, test spraying lacquer thinner as an alternative to slightly melt and reform the surface and not build too much gloss or create sealer "layering". A layer of sealer on top of another layer of sealer can result in poor bonding between layers and that can cause separation peeling that looks grayish.
Concerned about Doing It Yourself or what your contractor says?
If you are concerned about doing it yourself - consider that the satisfaction of a project is directly related to YOUR knowledge of what needs to be done and how. Who actually does the work is less important. We estimate that 50% of the usage of Aldon products is by "do it yourself" homeowners and we know they are happy because we hear from them.
Our goal for our contractor customers - NO CALL BACKS. A good contractor will understand the logic of Aldon application instructions on the labels and will not take shortcuts. If a contractor does not agree, feel free to let us find out what is so unusual about this particular project so the contractor does not have to return.
© Aldon Corporation All Content, Design, Copy, Code, and Graphics copyright 1995-2017 by
Aldon Corporation and protected under applicable USA and international intellectual property law.
Our goal for our contractor customers - NO CALL BACKS. A good contractor will understand the logic of Aldon application instructions on the labels and will not take shortcuts. If a contractor does not agree, feel free to let us find out what is so unusual about this particular project so the contractor does not have to return.
Aldon Corporation and protected under applicable USA and international intellectual property law.